Race-bred gloves for track day enthusiasts

Product information

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data and testing from our MotoGP riders delivered to your hands to use on your preferred track.

Built for speed and comfort
Slip your hands into these gauntlet-style gloves and easily and secure them with a double cuff closure and a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm and thumb.

The body of it
The body of Control gloves is comprised of a tough yet supple goat leather and cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable and stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps and hands can stay cool when things heat.

Setting you up for success
Pre-curved fingers, stretch in the places you need the most flexibility in (think thumb, finger lip and thump lips), and for the first time in our gloves’ history, outside finger binding helps set track riders up for success. Not to mention we also included a stretch panel on the inside of the hand for even more dexterity. A moisture-wicking tri-fleece liner has also been incorporated.

Incorporated safety
High-impact absorption comes in the form of the SEESOFT foam at the palm and wrist, while Temperfoam® can be found at the back of the hand, cuff, fingers, palm, and more. Furthermore, a TPU hard knuckle, finger knuckles, and palm slider are there for you if you take a tumble.

Comfort features

Adjustability

Adjustment strap at wrist
The hook-and-loop adjustment strap at the wrist allows for optimum adjustability and fit when using our gloves. Find the ideal tightness and comfort every time it is used.

Adjustment tab at cuff

Harmonica construction

Stretch at thumb

Stretch lips at fingers

Stretch lips at thumb

Closure

double cuff closure

Wrist strap

Lining

Moisture-wicking tri-fleece liner

Features

conductive fingertip at index finger
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Grip patch at palm
A grip patch is made with a texturized pattern to deliver a superb grip performance.

Grip patch at thumb

Long cuff

Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.

Pre-curved fingers

Climate regulation

Ventilation

Ventilation holes

Protection in this product

Protection

Little finger protection bridge
We included a little finger protection bridge on these gloves because the little finger is highly vulnerable in the event of a fall. It is conjoined to the ring finger to increase its protection.

PWR|Yarn

SEESOFT at palm

SEESOFT at wrist
SEESOFT at the wrist of these gloves offers additional protection and impact absorption.

Temperfoam® at back of hand

Temperfoam® at cuff

Temperfoam® finger knuckles
The self-contouring foam is used in areas where mobility and fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version.

Temperfoam® palm slider

Temperfoam® thumb knuckle

Temperfoam® underneath knuckle protector
Premium, comfort and protection enhancing, viscoelastic foam that molds to the rider’s knuckles.

TPU backhand protector
We use Thermoplastic Urethane (TPU) – a highly durable synthetic material – at the backhand of these gloves to add additional impact protection and to optimize sliding in the event of a mishap.

TPU hard shell finger knuckles
Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection and waterproofing.

TPU hard shell knuckle

TPU hard shell palm slider
Palm slider made of a durable and high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly.

TPU hard shell thumb protector

TPU cuff protector
We use Thermoplastic Urethane (TPU) – a highly durable synthetic material – at the cuff of these gloves to add additional impact protection and to optimize sliding in the event of a mishap.

Outer shell material

3D air mesh
This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.

cowhide
Cowhide has been used in this garment for optimal fit and protection.

goat digital with WR finish

Drum-dyed stay soft goatskin leather
Drum-dyed goatskin to assure durable softness

Kangaroo leather
Kangaroo leather has been used in the construction of this product.

microfiber e-touch

PU (polyurethane) coated fabric

PWR|4-way stretch
A highly abrasion-resistant outer shell material that has stretch and strength in both directions woven into its construction, helping to protect riders.