If your pool opens up green every spring, this post is for you. Here’s some ways to prevent a green pool opening, and be confident of a blue pool when the cover comes off. Pools open green when the winter cover is not keeping out debris, the water chemistry is poor, and there is inadequate sanitizer.

Even if you open late, and even if you have a mesh safety cover – you can skip the stains and discoloration by avoiding these problems with the pool cover and the winter water chemistry.

Install a Safety Cover

One of the most guaranteed ways to prevent a green pool opening is to install a solid safety cover without drain panels. Safety covers keep out winter air pollution, pollen, and dust by blocking rain and snow. This helps keep the water balanced and conserves chemicals.

For pools with a raised wall, for a raised spa or higher deck level, there are two ways to install a safety cover: in the wall, or over the wall. In-the-wall installations may not fit so well, and fill with leaves during winter. It’s always best to go up-and-over on pools with raised walls.

Floating solid pool covers, with water bags, can be a great cover when drained regularly and kept clean. However, they are sensitive and can tear if debris or animals scratch the surface. If you don’t maintain the cover well, a large tear can develop and spill contaminated matter into your pool.

Maintain Winter Water Balance

If you close your pool clean, with balanced water, and a winter kit, you can expect those chemicals to last about 5 months.

For pools that open green each year, something extra is needed, like Pool Magic + PHOSfree. Pools with green spring openings usually have a phosphate problem, although they may also have cover problems and/or water level problems.

The most important thing to note with winter pool chemicals is that more will be needed if you have contaminants entering the pool, be they full sized leaves, or dust that washes off the trees. More will also be needed when the temperature of the water rises.

Pool Water Temperature Concerns

When the pool water temperature drops to 50ºF or below, the algae risk is almost nonexistent. Chemicals also last longer when the water is cold. But when the water temps warm up in the spring, your chemical protection can deplete quickly. In temperatures above 65ºF, winter pool chemicals become active and will work themselves to death.

Use winter chemicals just after closing and just before opening. During the colder months, very little is going on under the cover, but as things heat up, more chemicals are consumed, and more organisms spring to life. Mesh covers will allow some sunlight to pass through, which can warm the pool surface.

Mesh Pool Cover Problems

Solid and mesh covers with drain panels let in all sorts of microscopic debris during the winter. If the pool water level is allowed to touch the underside of the cover, leaves get stuck on the cover, and a tea bag effect is created.

Water balance can change dramatically in a mesh covered pool. It should be checked at some point during the spring. It’s a good idea to add an extra dose of shock or algaecide (but not both) as the weather begins to warm up into the 60’s.

Our Recommendation

In mid to late spring, or about a month before you plan to open the pool:

1. Remove springs on both sides of the pool. Fold x onto itself in the center.
2. Use a small submersible pump or a siphon to lower water below the tile.
3. Check and balance the water chemistry and shock the pool, or add a Qt. of algaecide.
4. Fill the chlorine floater with tablets.
5. Brush the walls on both sides of the pool.
6. Put the pool cover back on tightly.

If you open up to a green pool each spring, think if you have any of these problems above, fixing one or more of them can give you a beautiful blue pool next spring!

摘要

在這個篇章中，我們將深入探討為何「人類與自然和諧共處」不僅是一種理想，也是一種必要。開場白強調了探索自然的重要性並展示了與我們日常生活息息相關的連線點。隨後，從亞裡士多德到摩爾的思想之旅彰顯了試圖給大自然貼上價格標籤的哲學辯證過程。

G． E． Moore對於大自然美學的見解提供了一種新視角，讓我們賞析大自然本身所固有的價值而非其功能性利益。透過比較以人類為中心與以大自然為中心兩種觀點，文章揭露了如何看待和評估自然界的多面向價值。

實際案例則讓我們看到當非人類中心主義應用於真實世界時可能帶來的挑戰與影響。討論從整體生態系統到單一物種保護工作優先次序時所涉及的道德難題，刻劃出保護努力需要平衡和考量各方面因素。

行動起來部分則呈現根據大自然固有價值所衍生出來的環境道德行動準則。它啟迪我們如何將這些準則轉化為具體行動，以促成更加和諧共處的未來。

在回顧與前瞻章節裡，文章邁向更加包容性的環境倫理視野;透過反思過去、現在至未來三者間交錯影響下形成完整視角。

整合這些核心觀念後，本文提供讀者洞見性分析及展望「人類與自然和諧共處」所能開拓出無限可能性。作為業內部落客，在此分享我的見解：只有認知並尊重每一份存在於地球上生命形式固有價值之時，才能真正走向永續共存之路。

引言:環境倫理學的探索與自然價值之辨析

當我們凝視著浩瀚的星空，或是漫步於鬱郁蔥蔥的森林時，是否曾經反問自己：這片大自然對我們真的有價值嗎？今日，隨著工業化與技術進步不斷地塑造我們對世界的認知，「環境倫理學」作為一門探索人類與自然關係的哲學分支，提供了一扇視窗去重新評估那些被視作理所當然的觀點。在此範疇下，自然價值之辨析成了核心話題。

首先讓我們澄清一點：何謂「自然價值」？它可以指向生態系統提供的直接功利性益處，如氧氣、水資源與食物;同時也涵括了更加抽象、非物質化的層面——比如心靈寄託和美感體驗。但是，在這種多元評估中存在一項挑戰：如何在人類需求與保護自然間求得平衡？

現今社會普遍趨向人本主義立場，強調自然界存在的目的是為了服務人類福祉。而相對地，生態中心主義則提出另外一種看法——它強調每一物種及其生存空間都具有固有價值，無需以人類利益來定義。

本文旨在客觀分析各派思想對於「何為正確」、「何為必要」所持立場。資料和案例將穿插其中以支撐議論，並從各角度展示這些理念如何影響政策制定和整體社會行動。畢竟，在追求可持續發展道路上，我們不能單純依靠直覺或情感反應;科學根據和深入分析乃至關重要。

因此，在開啟這次探索之旅前讓我提出一問：如果大自然不再只是被視作資源庫而已呢？想像其中可能帶來哲思轉變與內省之力量吧！
本文歸納全篇注意事項與風險如下，完整文章請往下觀看

• 須注意事項 :
  • 高度理論化可能限制一般大眾的易讀性和實際參與程度,降低信息傳播效率。
  • 專業術語和深奧哲學辯證可能令部分讀者感到排斥或困惑,影響訊息吸收。
  • 在具體行動指南方面缺乏足夠詳細的操作步驟或案例分享,減少了實用指導意義。
• 大環境可能影響:
  • 當前快速發展且以利益為導向的消費文化可能抵制或忽視「人類與自然和諧共處」所倡導的價值觀。
  • 特定利益集團可能因不符合其立場而反對相關理念推廣及政策實施,造成政治阻力。
  • 由於氣候變遷、生物多樣性喪失等全球性挑戰加劇,即便有良好理念也面臨落地實施時效果被稀釋或逆轉的風險。

哲學探源:從亞里士多德到摩爾-自然價值的演進之旅

自然的價格標籤：從亞裡士多德到摩爾的思想之旅
當我們試圖將價值貼上標籤時，大自然常常讓我們處於窘境。古希臘哲學家亞裡士多德曾經提出，自然界中的一切物種和資源都有其目的和功能，這種觀點奠定了後來「天賦價值」的理念基礎。他認為人類社會與自然秩序息息相關，且人類需遵循這一秩序以實現最佳生活方式。

跳躍至20世紀初期，英國哲學家G． E． Moore在他著名的作品《倫理學原理》中進一步拿起放大鏡深入探討了美學與道德價值之間微妙而複雜的關係。他辯證地指出，在欣賞大自然美景時所感受到的「善」是無法用任何形式量化或減少為更基本元素的;它是直接被認知且不可分割的。

那麼，在這段由古典至現代、由具象至抽象價值觀轉變中，我們如何給大自然定義一個“合適”的標籤？究竟什麼才是真正衡量山川、森林、野生動物等存在意義及重要性的尺度？事實上，雖然市場經濟嘗試透過生態系統服務評估等手段來計算其貢獻——例如碳固存能力、水源保護功效——但此方法未必能涵蓋所有非物質文化利益或精神性享受。

本段落旨在揭示人類如何努力去理解和衡量大自然無形之美及其固有價值。歷代思考者結合各自時代背景提出見解，但均未完全解決如何客觀評估這些無法用金錢衡量卻極端重要的資產。而今日，在面對氣候變化與生物多樣性流失等迫切問題時，重新審視這些古老而現代的智慧成果對於塑造我們對待地球家園行動準則愈發重要。

我們在研究許多文章後,彙整重點如下

網路文章觀點與我們總結

• 不同文化和哲學將自然的本原解釋為「空氣」、「火」等元素,展示了對宇宙起源的多樣性理解。
• 道家哲學中的自然觀念強調無為而治,追求精神上的自由與和諧。
• 西方對「自然」一詞的使用可能與中國傳統意義有所差異,顯示語言和文化背景在理解概念時的影響。
• 科學領域認為自然是運動中的物質,並以此作為探索宇宙定律和現象的基礎。
• 前總統李登輝通過墨寶「真實自然」表達了對真實與自然深刻的思考及其重要性。
• 自然主義哲學立場排除超自然因素,強調所有現象都可以用自然理由來解釈。

面對浩瀚無垠、充滿生命力的大自然，我們每個人或許都曾感到一種難以言喻的敬畏之情。從古至今，不同文化、哲學甚至科學領域裡關於這個世界如何形成、運作及存在的探索從未停歇。無論是把根本歸因於某種元素還是追求精神層面上與大自然合一的生活方式，這些思考不僅豐富了我們對世界觀點，也讓我們更加珍惜身處這片廣袤宇宙中所享受到每一份天賦。「真實與自在」不只是美好願景，更像是引領我們向前邁步的指南星。

學術洞見:深究G. E. Moore對自然美感的精闢詮釋

親愛的讀者們，當我們在探討大自然的美學及其價值時，不可避免地會提到G． E． Moore這位哲學家的獨到見解。Moore是一位20世紀初期的英國分析哲學家，他對倫理學、美學以及自然界真實之美的理解有著深遠影響。

在賞析Moore關於大自然美學的觀點之前，我們必須先了解他所主張的「非自然主義」。Moore認為道德和美好事物（如大自然）具有無法用科學或實證方法測量的固有價值。在他最著名的作品《道德原則》中，Moore指出人類感知到的「美」不可以被還原為物質性質或客觀條件;它存在於一種直觀認知層面上。

深入探索這位哲人對大自然之美的看法時，我們發現他認為欣賞大自然是一種直接而非工具性的體驗。換句話說，在Moore眼中，山川、海洋和生物多樣性等都不僅僅因為它們能夠帶給人類利益才重要，而是因為它們本身就具備一種難以言喻卻又明確存在著毋需外加目的即足以讓人推崇與保護的價值。

透過專業期刊如《Environmental Ethics》等文獻回顧來看， Moore對於大自然固有價值和審美體驗提供了重要啟示。例如， 他關於整體與部分間關係的討論幫助我們理解， 在評估生態系統或景觀時不能忽視任何單一元素; 每株植物、每隻動物乃至每塊岩石都貢獻了其特有之美。

正是基於這些思考， 我們作為現代社會成員更應當從一個更全盤細緻地角度去審視我們與環境間複雜且富於情感色彩地聯絡。由此 Moore對於我們今天仍保持高度相關性：只要涉及到評價環境問題時內在價值與外部效益間需要平衡時， 他關於審美經驗與道德認識相互交織這一點便顯得格外突出。

我的朋友們，請記住：當我們站在廣闊無邊、生機勃勃卻也極端易碎脆弱地球面前時，讓我們不再單純追求功利化地資源使用方式去消減其價值 － 而是像Moore所展現給我們那樣，用心靈去感知並賦予每個自然場景應得地敬意。

人類與生態視角:掂量不同立場下對自然的估值差異

當我們探討自然界的價值，我們遇到了一個哲學和倫理上的分水嶺：人類中心主義與非人類中心主義。這兩種觀點對於如何評估和對待自然環境持有截然不同的立場。

讓我們談論人類中心主義（Anthropocentrism），它是一種長期以來支配西方思想的觀念，認為所有道德考量應該圍繞著人類的利益。在這種框架下，大自然被視作資源庫，其價值取決於它能夠為人類社會帶來什麼好處——無論是物質上如木材、礦產等，還是精神性質如美景、靈感等。換言之，在這樣的世界觀裡，保護自然只有在它對於提升或維持人類福祉時才被認為是重要的。

相對而言，非人類中心主義（Biocentrism 或 Ecocentrism）推崇大自然具有固有價值。這意味著生態系統、動植物以及地球本身都擁有不受人類需求影響的價值。此觀點強調所有生命形式都享有存在權利， 並且我們作為其中一份子， 持有保護整體生命平衡不受過度開發或毀滅性行為幹預的責任。

例如，在面對森林保護問題時，一位堅持人類中心主義者可能會衡量森林能提供多少可出售木材或吸收多少二氧化碳來抵消全球暖化效果;而非人類性立場則更加關注森林本身所代表生物多樣性與其在整體生態系統中扮演角色。

現今越來越多科學家和政策制定者開始意識到單純從效能或效益角度看待自然可能引起侷限性判斷與非可持續行動。因此，在汲取了深層次自然美學、原住民智慧以及全球生物共存理念後，他們正嘗試找到兩種觀點間更加均衡且全面包容地看待自然界真正價值的方法。

在閱讀本文時記得每一位讀者都肩負著塑造未來地球家園方式的重任。透過深入理解上述兩種看法， 我們可以為我們與大自然間互動方式做出更明智、更富遠見和更符合道德責任感的選擇。

實踐驗證:案例分析展現非以人為本的環保實施成效

親愛的讀者們，當我們探討環保的實踐驗證時，有一個案例特別值得關注。這不僅是一則故事，而是對非以人類為中心的保育策略成功典範的見證。在美國黃石國家公園，1995年重引入灰狼的計劃提供了豐富洞見。灰狼此前因過度獵殺而絕跡於該地區。

這項行動最初受到爭議，部分人擔心會影響牧場業務與遊客安全。時間已證明其成效：生態系統恢復了平衡。灰狼控制了草食動物群體大小，這反過來促使植被復興、河流穩定化並且增加了生物多樣性—稱之為「溯源效應」（trophic cascade）。

這一案例精確展示瞭如何透過考量自然固有價值和生物間關聯性來取得長期可持續發展成果。雖然當初目標並非直接針對人類利益，最終卻也惠及社群居民、旅遊業和整個地區。

儘管使用些許技術術語，“溯源效應”在本質上解釋了物種互動如何影響整個生態系統—一種自然界中相互依存的微妙平衡。

現今，在面臨各式各樣的環境挑戰時，從黃石國家公園學到的教訓提醒我們要有包容性思考：即使是看似小小的改變也可能帶來巨大影響。我們所做出的每一項決定—無論是再次引入某物種還是修建新水壩—都需要細心權衡其對自然界深遠連帶效果。

透過調查報告、科學期刊和知名保育組織提供資料支援後可以清晰看出，在考量行動前置作業時若能先辨析自然界固有價值將更能促進全面福祉。

所以呢，當我們站在十字路口上思考未來方向時， 不妨從更廣泛角度去想像可能性——不只是基於我們立即需求， 而更基於長久共享地球家園的觀點。

保育取向辯證:從生態系統至物種個體的倫理考量與優先次序

在探討保育取向時，我們面臨一項關鍵的辯證：如何在生態系統整體的健康與特定物種個體的福祉之間找到適當的平衡。這是環境倫理學中一項複雜且多層次的挑戰，它涉及價值判斷、生物多樣性策略以及對地球未來可持續性的願景。

從全球氣候變化帶來的威脅到地方瀕危物種保護計劃，每一項決策都需要仔細考量不同利益相關者和生態系統服務。例如，在決定是否重建河流自然流程以促進河川生態系統健康時，我們必須同時評估此行動對當地漁業社群可能造成的影響。

透過針對特定案例進行代表性生態道德原則（如深層生態學、資源基礎保育和人本中心主義等）的實際比較分析，我們可以揭示不同立場下所強調的價值點。例如，在某些情況下，基於生物圈完整性或野外美感儲存而非直接人類性利益去推行某些保護措施可能更受到支援。

此外，科學資料和長期監測是不可或缺的要素。只有透過精確測量與分析，才能制定出符合自然固有價值與社會需求之間平衡點上有效率且道德上負責任的政策。

因此，在本節中， 我們將深入了解環境倫理學在實踐中如何應用於各種決策過程，並探討這些決策如何反映我們對待自然界和我們自身角色認知上所發展出來複雜而細緻化了解。

責任與行動指南:根據自然固有價值所衍生之環境道德準則

在「責任與行動指南：根據自然固有價值所衍生之環境道德準則」的探討中，我們首先得承認一個核心前提：自然界並非僅是人類利益的工具，而是一個包含無數物種和生態系統的複雜網路，它本身就具有固有的價值。這意味著，在作出涉及自然資源利用或保護決策時，我們必須超越人類中心主義的視角。

實踐上，這要求我們建立一套道德準則來指導行動。在此框架下，可持續性不再只是一種選項，而是所有活動計劃必須優先考量的原則。例如，在企業開發新產品時應該納入全生命週期評估（Life Cycle Assessment， LCA），以確保其對環境影響降至最低。

此外，基於「不傷害原則」（Principle of Nonmaleficence），我們有義務防止未來可能因當前行為而造成的環境退化。這包括採取預防措施來遏制氣候變化、保護生物多樣性和支援土地恢復等行動。

面向更廣泛社會層面，公正原則（Principle of Justice）呼籲我們關注那些由於社會地位或地理位置而受到環境問題影響最深的群體。透過政策制定與公共投資來支援弱勢團體抵禦氣候變遷帶來的衝擊是實現這一準則的關鍵步驟。

在日常消費中也能反映出對自然固有價值的重視。透過偏好那些使用可再生材料、促進公平貿易並且注重環境保護新穎商業模式的產品和服務，每位消費者都可以在塑造更加永續未來方面扮演作用。

科學知識與技術革新雖然至關重要，但沒有配套的道德準則引導其走向正路，技術力量同樣可能成為加速毀壞之手。因此，在追求科技發展與利用自然資源以促進人類福祉時， 我們必需牢記這份由自然界固有價值所派生出來 的環保責任與義務。

結語與展望:邁向更全方位包容性的環境倫理學視域

在本次探討「環境倫理學辯論： 尋求自然界價值與人類義務的平衡」的旅程中，我們已遍歷從古典哲學到當代思潮的豐富地形。引言部分揭開了對自然價值深層次理解的序幕，使我們意識到環境問題不僅是物質上的挑戰，亦是一場深刻的哲學與道德辯論。

回溯哲學大師們的足跡，從亞裡士多德對自然有目的性的看法到G． E． Moore對自然美感啟迪性詮釋的智慧，我們逐步認識到自然界和人類之間錯綜複雜而微妙的關係。透過洗鍊且精確地裁剪這些哲學家所提供給我們時間之鏡中反映出來、或曖昧或明朗但必須面對的景象。

在考量人類與生態視角時，我們發現估值差異源於各種文化、社會乃至於個人信念。實踐驗證章節透過案例分析強調了在非以人為本框架下推行環保政策所能取得成效，展示了多元價值觀共存下可能出現新型合作模式。

穿越保育取向辯證讓我們清楚見到：無論是聚焦生態系統抑或物種單一體，在做出任何決策時都需要權衡利弊和優先排序。責任與行動指南章節基於對自然固有價值充分認知後制定了具可操作性之道德準則。

如今，在結語與展望階段，站在全方位包容性環境倫理學視域門口之前， 我邀您一同期盼未來—一處更加明智管理及愛惜周遭世界之地方。當持續挑戰常規思維、勇於接納創新觀點時， 我相信我們可以攜手打造更加和諧共處於天地萬物間之文明社會。

Luonnon itseisarvon kritiikki

Kimmo Salvén – 5.11.2013 – 11:36:39
Filosofian professori Seppo Sajama Itä-Suomen yliopistosta puhui Filosofiakahvilassa pitämässään alustuksessa luonnon itseisarvon kritiikistä.
Sajama toteaa luonnon itseisarvon käsitteen olevan ympäristöfilosofiassa asia, jota ei usein kyseenalaisteta, niinpä hän tekee sen nyt.

Aristoteles nousee väistämättä esiin itseisarvon käsitystä tutkiessa. Sajama toteaa, että Aristoteleen mukaan onnellisuus on ainoa asia mitä haluamme aina sen itsensä, ei milloinkaan jonkin muun asian takia.
– Kaikki ihmiset haluavat onnellisuutta. Tämä tarkoittaa, että kaikki ihmiset haluavat jotain oman onnellisutensa vuoksi. Se voi olla kunnia, nautinto, ymmärrys ja niin edelleen, kuten Aristoteles luettelee, Sajama toteaa.
– Haluamme siis eri asioita, mutta haluamme niitä onnellisuuden välineinä.

Sajaman mukaan Aristoteles jakavaa arvokkaat asiat kolmeen ryhmään: Itseisarvoihin, välinearvoihin ja sekä itseis- että välinearvoihin.
– Nautinto voi siis olla hyvä asia itsessään, mutta myös väline onnellisuuden saavuttamiseen.

Moore on Aristoteleen jälkeen eniten itseisarvon käsitteeseen vaikuttanut filosofi. Ympäristöfilosofiassa luonnon itseisarvo käsitetään nimittäin yleensä moorelaisittain luonnolla olevaksi, ihmisestä riippumattomaksi arvoksi. Tämän käsityksen mukaan luonnolla olisi itseisarvonsa, vaikka yhtäkään ihmistä ei olisi sitä kokemassa.
– Hän sanoo, että itseisarvo näyttäytyy luotettavasti vain silloin, kun se on eristetty ulkoisista häiriöistä.

Kuvittele äärimmäisen kaunis maailma. Kuvittele se niin kauniiksi kuin ikinä voit. Sijoita siihen mitä tahansa, mitä pidät kaikkein kauneimpana tässä maailmassa: vuoria, jokia, meriä, puita, auringonlaskuja, tähtiä ja kuu. Kuvittele, että nämä kaikki yhdistetään hienoin suhtein, niin ettei mikään niistä riitele muiden kanssa vaan jokainen tuo oman lisänsä kokonaisuuden kauneuteen. Ja kuvittele siiten rumin maailma, jonka voit mitenkään käsittää. Kuvittele se saastaläjäksi, joka sisältää kaiken, mikä eniten iljettää meitä mistä tahansa syystä, ja jossa ei ole yhtään miellyttävää piirrettä. … Ainoa asia, jota emme saa kuvitella, on se, että joku ihminen on koskaan asunut tai edes voisi asua kummassakaan ja voisi nähdä toisen kauneuden ja nauttia siitä ja vihata toisen rumuutta. … Onko jotenkin irrationaalista väittää, että olisi parempi, että olemassa olisi kaunis maailma kuin ruma?

G. E. Moore 1903: Principia Ethica. Cambridge: Cambridge University Press

Onko siis itseisarvoja olemassa ilman ihmistä niiden kokijana?
– Jos on olemassa ei ihmiskeskeisiä itseisarvoja, miten ne voidaan havaita? Kuka ne voi havaita? Siinä on pieni ristiriita, että luonnon itseisarvon olisi toimittava ihmisen toiminnan johtotähtenä ja että se on kuitenkin jollain tapaa eristettävä ja sitä ei saa havaita ihmiskeskeisesti.

Siispä Sajama palaa Aristoteleen ajatuksiin luonnon itseisarvosta.
– Aristoteleen naturalistinen idea oli, että jollain asialla X oli arvoa oliolle Y siinä tapauksessa, että X edistää Y:n hyvää elämää. Tämä oli siis räikeä naturalistinen virhe.

Kuinka siis saada itseisarvo mukaan yhtälöön? Voidaanko itseisarvo löytää muista kuin elollisista olioista? Antaako luonnon itseisarvo ihmiselle velvollisuuden suojella kaikkea elämää ja onko kaikki elämä tasa-arvoista?

Olipa kerran itseisarvoinen lammas, joka söi itseisarvoista ruohoa itseisarvoisella niityllä. Sitten paikalle tuli itseisarvoinen susi, joka söi lampaan. Lopuksi itseisarvoinen ihminen ampui suden. Loukattiinko tässä luonnon itseisarvoa? Missä vaiheessa?

Olli Saastamoinen & Seppo Sajama

Usein luonnon itseisarvoa käsitetään asettamalla vastakkain luonto ja ihminen, mutta kuuluuko ihminen luonnon itseisarvon näkökulmasta muiden eliöiden joukkoon?
Mooren ja Aristoteleen näkemysten lisäksi puheenvuorossa nousevat esiin mm. John O’Neil, James Coufal, Holmes Rolston III, Oidipus ja Tuomas Akvavinolainen.

After what seems to have been an endless winter, the warm days can’t get here soon enough, and they’re finally right around the corner! And nothing can ruin your day faster than pulling back your pool cover to see a green, algae-filled pool. Hopefully this won’t happen to you this summer, but if it does, here’s what you’ll need to know about shocking your pool to remove algae.

First Steps to Clearing a Green Pool

Before you start pouring shock in the pool, the first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the skin and allows the pool shock to more easily kill the algae. Once you’ve done this, it is important to make sure you have the proper pH level in your water. The best pH level should be on the low side, between 7.2-7.4. A high pH level can prevent the chlorine shock from properly killing the algae. Be sure to test your pH before adjusting, with a fresh and reliable test strip or test kit.

In order to clear a pool suffering from a severe algae bloom, a chlorine level of about 30 ppm is preferable for optimal results. If you aren’t dealing with a full blown algae bloom, levels of 10-20 ppm can be effective.

Shock the Pool:

The best way to administer shock into your pool is by pouring it into a bucket of water with at least a couple gallons of water. Mix it to dissolve, and pour the mixture around the perimeter of the pool. And remember — always add shock to water, never add water to shock!

Now it’s time to wait a while. Keep your pump and filter running. Give the shock a good 12 to 24 hours to work its magic. If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.

When the chlorine has completely finished working, the algae in the pool will turn a white/gray color and will either settle to the bottom of the pool or be suspended in the water. There shouldn’t be any more green color and the water visibility should be improving. Run the filter 24/7 and backwash as needed.

Clean the Pool:

When the water begins to clear, it’s time to vacuum your pool to get rid of all the dead algae. You can use a flocculant to settle suspended debris or a clarifier to aid in filtering. It is best to vacuum the dead algae to waste. You don’t want to trap all the dead algae in your filter. That can create a recurring algae problem.

Once the debris is gone from the water, it’s time to brush again with a new or good condition pool brush. Make sure there is no residual algae left on the walls or floor. Brush vigorously! If you feel the pain in your shoulders and arms, you’re doing it right!

Clean the Filter:

After a thorough vacuuming and brushing, it is a good idea to clean your filter as well. If you have a DE or cartridge filter, remove the element and soak or spray with In The Swim Cartridge Filter Cleaner, and spray away all dirt and algae. Sand filters are a little more difficult to get clean. You can either replace the sand, or you can use a Sand Filter Cleaner. Natural Chemistry’s Filter Perfect does a great job on any filter type, using natural enzymes and citric acids.

Test and Balance the Water Chemistry:

Test and adjust your pool to these levels: Free chlorine: 2.0–4.0 ppm, pH: 7.4–7.6, Total Alkalinity: 80–120 ppm, and Calcium Hardness: 200–400 ppm. Proper water balance in your pool is crucial to keeping clean water and staying algae free.

Any time your pool drops below 1 ppm of free chlorine, you are in the danger zone for algae (not to mention bacteria and viruses), especially if your pH and alkalinity levels are off, too. When your chlorine level is not high enough, it fails to kill off organic compounds that aid in algae growth.

Algae feeds off of phosphates found in plants and almost all other things in our environment. When phosphates enter the water with chlorine below 1 ppm, you’re almost sure to have an algae bloom. Sometimes it can even happen in a matter of hours!

How to Prevent Algae:

Prevent algae with good water balance and constant chlorination. There are a lot of maintenance products out there to help safeguard against algae and keep it from ever being an issue. For extra algae prevention, use weekly maintenance doses of algaecide and Natural Chemistry’s PhosFree to eliminate an algae food source.

Algae is a lot easier to prevent than to remove, but once you have it, brush the pool, lower your pH with a pH reducer, and then Super Shock the pool. Vacuum and brush again, and clean the filter — that’s the most effective way to get your pool back to normal.

Description

DOOZY VAPE CO. SERIOUSLY POD FILL MAX STRAWBERRY MILK

Seriously Pod Fill MAX Strawberry Milk, by Doozy Vape Co., is a unique variation on the intense sweetness of succulent strawberries splashed with milk for a creamier mouthfeel.
Explore Doozy Vape Co.’s vast range of e-liquids in their fruity, menthol and dessert-themed grandeur, including their Seriously Bar Salts, Seriously Salty and Seriously Fusionz.

Specifications

• Flavours: Strawberries, Milk
• Bottle Size: 40ml of e-liquid in a 60ml shortfill bottle
• Nicotine Strength: 0mg
• Nic-Shots: Space for two 10ml nic shots
• VG/PG Ratio: 50/50
• Vaping Style: MTL
• Manufactured in the UK
• Childproof Cap
• Tamper-proof Seal
• Easy Fill Spout

Established in 2015, Doozy Vape Co. is known globally as a premium-quality e-liquid manufacturer passionate about crafting the most ingenious flavours ever to bless the vaping industry. Thanks to Doozy’s years of expertise, their range covers a variety of flavours in both nicotine salts and shortfills, providing a flawless vaping experience for both mouth-to-lung (MTL) and direct-to-lung (DTL) vapers. Suffice it to say, their variety and delectable flavours make them the ultimate substitute for single-use disposable vapes and guaranteed to suit your refillable pod kit.

Unlike other common shortfills, these Seriously Pod Fill MAX shortfill e-liquids are expertly balanced in a 50/50 VG/PG mix, all suitable and recommended for use with low-powered Vape Starter Kits (mouth-to-lung) and Pod Vape Kits.

Available in a 60ml bottle containing 40ml of e-liquid, the MAX edition empowers vapers to adjust their nicotine strength to their liking further. The bottle leaves space for two optional 10 ml nicotine shots to be added, where one nic shot would ensure a nicotine strength of approximately 3 to 4mg, while two nic shots would achieve roughly 6 to 7mg overall strength. 

1. Activated alumina ceramic balls have a certain adsorption effect and can be used to adsorb some polar substances. Simply put, activated alumina is active and will react with the material. Activated alumina ball has many capillary pores and large surface area, which can be used as adsorbent, desiccant and catalyst. At the same time, it is also determined according to the polarity of the adsorbed substance. It has a strong affinity for water, oxides, acetic acid, alkali, etc. The activated alumina ball is a kind of micro-water deep desiccant, and it is also the adsorption of polar molecules. Agent. Activated alumina ball fluoride removal is similar to anion exchange resin, but the anion resin is more selective for fluoride ions. Activated alumina has good adsorption and defluorination effect, stable capacity, and 6400 grams of fluorine per cubic meter of activated alumina. The product has high strength, low wear, water immersion, no softening, no swelling, no powdering, no cracking.

Activated alumina ball has many capillary pores and large surface area, which can be used as adsorbent, desiccant and catalyst. At the same time, it is also determined according to the polarity of the adsorbed substance, which has a strong affinity for water, oxides, acetic acid, alkali, etc. The activated alumina ball is a kind of deep desiccant for water, and it is also an adsorbent for adsorbing polar molecules. .

Application field

Activated alumina balls can be widely used in the deep drying of petroleum cracking gas, ethylene and propylene gas and hydrogen production, air separation plants, instrument air dryers, and fluoride treatment in hydrogen peroxide. It can also remove sulfur hydrogen, sulfur dioxide, and hydrogen fluoride in the exhaust gas. , Hydrocarbons and other pollutants, especially suitable for the defluorination treatment of fluorine-containing

2. Inert alumina ceramic balls are ordinary ceramic balls, which are used as spacers before and after the catalyst layer is filled in the reaction. The inert alumina ball is inert, will not react with the material, and play a protective role.

Inert ceramic balls have the characteristics of high strength, high chemical stability and thermal stability. Inert ceramic balls can withstand high temperature, pressure, acid, alkali, salt and various organic solvents. Inert ceramic balls are mainly used in petroleum, chemical, Fertilizer, natural gas and environmental protection industries. Inert ceramic balls are used as the support and covering material of the catalyst in the reactor, which can buffer the impact of the liquid and gas entering the reactor on the catalyst, protect the catalyst, and improve the distribution of liquid and gas in the reactor.

The inert ceramic ball has the characteristics of high strength, high chemical stability, thermal stability and resistance to high temperature, high pressure, acid, alkali, salt and various organic solvents.

In addition, activated alumina is generally not called porcelain ball, and inert alumina is called porcelain ball.

WooCommerce和Wix是比较受欢迎的两个建站程序，WooCommerce是一个开源的电子商务平台，Wix是一个完全集成了电子商务功能的网站构建器，那么WooCommerce和Wix哪个好？WooCommerce和Wix的区别有哪些呢？

一、基本介绍

WooCommerce是一个WordPress电子商务插件，可以免费下载、安装和使用，而WordPress是一个自托管的开源内容管理系统。它比Wix更有效，但需要更强的专业技术。Wix是一个拖放式、基于云的web开发平台。它允许用户通过使用在线工具创建有效的HTML5网站、商店和移动网站。

二、社区

WooCommerce社区是致力于WooCommerce的最大、最活跃的群体。全世界有超过400，000名WooCommerce会员、贡献者和开发者。

Wix为其用户提供了一个博客社区。用户有机会与有相似经历的人联系，分享他们的生活经历。

三、主题和模板

WooCommerce您可以找到各种企业的主题，包括电子商务商店、销售数字产品的企业等等。而且，有这么多选项可供选择，你一定会找到适合你需求的主题比如Themeforest。

Wix是一个网站建设者，为您提供一切你需要创建一个有吸引力和时尚的网站。有500多种模板可供选择，您可以找到符合您需求的设计。模板易于使用，并允许大量的定制。您可以更改颜色、字体和布局，并添加您自己的图像和文本。Wix还为企业在线销售产品提供了一个电子商务平台。

四、商店建筑界面:

你可以在主题和插件的帮助下建立一个WooCommerce商店。通过主题，您可以选择商店的外观和感觉，而附加组件则允许您为商店添加功能。这使得创建完全适合您业务的在线商店变得非常容易。

Wix网站构建器有一个交互式拖放用户界面。使用这种直观的技术，您可以很容易地创建一个专业外观的网站。只需选择您想要使用的元素—图像、幻灯片和文本—并将其放置在页面上您喜欢的任何位置。你不需要任何编码技能或以前的网站设计经验来开始。

五、SEO

WooCommerce的一大优点是，它可以让你轻松地为SEO优化你的商店。如果你对配置元标签和描述有任何顾虑，WooCommerce将向你展示如何使用它们来吸引购物者到你的商店。也很容易找到大量的WooCommerce搜索引擎优化插件，所以你可以确保你的商店尽可能的搜索引擎友好。

Wix带有内置的搜索引擎优化管理功能，以确保您的网站为搜索引擎优化。他们的社交媒体海报和电子邮件营销工具帮助你接触到更广泛的受众，更有效地推广你的网站。

总结：

WooCommerce和Wix哪个好？WooCommerce比Wix好。WooCommerce是一个比Wix更先进的知名电子商务平台。WooCommerce对你的商店设计和功能提供了更大的控制权。如果你想给你的网站添加额外的功能或风格，你甚至可以创建你自己的定制插件。WooCommerce是专门为电子商务设计的，这意味着它拥有你管理网上商店所需的所有功能。另一方面，Wix是一个web builder平台，允许用户无需任何编码就可以创建网站。

WooCommerce完全免费使用，并且已经针对桌面和移动设备进行了优化。WooCommerce有Wix没有的功能。此外，WooCommerce拥有一系列令人印象深刻的功能，使其成为任何小企业主的完美工具。WooCommerce也具有可扩展性和适应性。这意味着你可以给WooCommerce的插件和主题添加自定义代码，让你的网站更加独特。

分类：新闻资讯

标签：Wix, Woocommerce

Time to read: 5 min

HDPE injection molding uses high-density polyethylene (HDPE), a cost-effective thermoplastic with good tensile strength and high impact resistance. This commodity plastic also has strong moisture resistance and is relatively easy to injection mold. HDPE is used in many applications, but it has a high rate of thermal expansion. Consequently, injection-molded HDPE parts are prone to higher shrinkage rates if they’re not designed and manufactured properly.

If you’re considering HDPE injection molding for your plastics project, keep reading to learn more about high-density polyethylene, including: 

• Advantages of HDPE
• Disadvantages of HDPE
• HDPE Injection Molding Applications
• Properties of Injection Molded HDPE
• Design Guidelines for HDPE Injection Molding
• HDPE Processing Guidelines
• Potential Alternatives to HDPE
• Succeeding With HDPE Injection Molding

Then, create a free Fictiv account and upload your part drawing. Along with design for manufacturing assistance (DFM) from our engineering experts, you’ll gain access to our carefully vetted network of manufacturing partners. Why search for an HDPE injection molder on your own when you can get expert DFM feedback and leverage the power of Fictiv?    

Advantages of HDPE

Injection molded HDPE provides important advantages.

Cost-Effective

HDPE, a type of polyethylene (PE), is a commonly used injection molding material that is significantly less expensive than specialty plastics and polymer blends. HDPE is readily available and has lower minimum order quantities (MOQs) than specialized materials.  

Mechanical Properties

HDPE can’t compete with engineering plastics in terms of performance, but it’s an attractive, low-cost option for many applications that require good tensile strength, impact resistance, and overall toughness.  

Chemical Resistance

Injection-molded HDPE resists a wide range of chemicals, including strong acids and bases. It also resists some oxidants and reducing agents. HDPE can be attacked by halogenated hydrocarbons, however, and it has limited resistance to mineral oils.  

Disadvantages of HDPE

Despite its advantages, HDPE also has disadvantages that part designers need to consider.

High Thermal Expansion

HDPE has a relatively high coefficient of thermal expansion (143 μm/°C), a property that describes the extent to which a material expands with an increase in temperature. Because heating occurs during injection molding, HDPE parts can expand significantly. In turn, injection-molded HDPE may experience warping when it contracts during cooling.

Difficult To Bond

High-density polyethylene is a low surface energy (LSE) material that is very difficult to bond. Overmolding, an injection molding technique that molds one material over another, is ill-suited for HDPE. Specialized glue and adhesives for HDPE are available, but plastic fusion welding can also be used for assembly.  

Flammable

HDPE is petroleum-based and highly flammable. It begins to burn when exposed to temperatures above 340°C and will continue to burn since it’s not self-extinguishing. For reduced flammability, HDPE grades with flame-retardants are available.

HDPE Injection Molding Applications

HDPE can be injection molded for industrial, automotive, and consumer goods applications. Food contact applications are less typical, but FDA grades of HDPE plastic are available. 

Industrial Applications

• Storage tanks
• Crates
• Mufflers
• Housings

Automotive Applications

• Fuel tanks
• Reservoirs for brake and washer fluids
• Cabin compartments
• Interior trim

Consumer Goods Applications

• Boat docks
• Cutting boards
• Plumbing fixtures 
• Outdoor cabinets

Properties of Injection Molded HDPE

HDPE is available in various brands and grades. The table below contains typical physical, mechanical, and injection molding properties of this popular material. 

Table 1: Properties of HDPE

Design Guidelines for HDPE Injection Molding

HDPE parts that are poorly designed are more prone to injection molding defects. When you work with Fictiv, however, you’ll get DFM feedback that can help minimize risk. To learn about part design, download our free “Injection Molding Design Guide” to use as a reference. 

Download the Injection Molding Design Guide

The following sections examine injection molding design considerations for HDPE parts.

Wall Thickness

Whenever possible, apply a uniform wall thickness throughout your part. If you need to use a greater thickness in some areas, make the transition from thinner to thicker sections gradual. Do not use transitions that are greater than 10% to 15% of the nominal wall thickness. Generally, the recommended minimum wall thickness for HDPE ranges between 0.76 and 3.18 mm. 

Shrinkage

Injection molded HDPE has a relatively high rate of shrinkage (up to 4%). The exact percentage depends on the grade of HDPE that you select, as well as the specific processing conditions. If parts shrink unevenly during cooling, warping may occur. To limit the risk of defects, reduce the wall thickness and the size of the mold gate area. 

Radii

Sharp corners are difficult to injection mold. Therefore, apply radii to both the inside and outside corners of your part. To limit stress concentrations and melt flow, make the radii at least 25% of the wall thickness. For maximum part strength, apply a radius equal to 75% of the wall thickness.

Draft Angle

Draft is the angle that you apply to the vertical walls of parts so that they eject cleanly from the injection mold. Because HDPE has a low coefficient of friction, parts with simple shapes need very little draft. For more complex HDPE parts, apply draft angles between 0.5% and 1% per side.   

Part Tolerance

Tolerances are acceptable variations in size for overall dimensions and part features. As a rule, parts with tighter tolerances are more expensive because they have stricter injection mold and processing requirements. In addition, parts with fine tolerances are more expensive to mold than parts with commercial tolerances. 

Table 2 below contains some dimensional tolerances for HDPE. Note how they are also based on part size.

Table 2: HDPE Injection Molding Tolerances

HDPE Processing Guidelines

Adherence to HDPE processing guidelines is beyond a part designer’s immediate control. Therefore, it’s important to work with an experienced HDPE injection molder. The following processing parameters are especially important:

Moisture

HDPE does not readily absorb moisture. If stored properly, it may not need drying before injection molding. Drying is required, however, if surface moisture has settled onto the material during storage.

Temperature Control

The melt temperature for HDPE is between 246 to 280°C. The mold temperature ranges between 45 and 65°C. Increasing the mold temperature can reduce internal part stresses and produce parts with a glossier surface finish. 

Injection Pressure

The injection pressure for HDPE injection molding depends on the design and size of your part. In general, however, injection pressures range from 5.5 to 10 MPa because HDPE flows readily. Reducing the injection pressure can help reduce part warpage. 

Injection Speed

HDPE crystallizes fairly quickly. Therefore, thin-walled parts need fast injection speeds. For thicker-walled parts, medium injection speeds are recommended.

Potential Alternatives to HDPE

Injection molded HDPE might not be the best material for your application. If that’s the case, you could consider polypropylene or nylon instead. Fictiv’s injection molding services work with both of these materials.

Polypropylene

Polypropylene (PP) is a commodity thermoplastic with good fatigue strength, a low coefficient of friction, and excellent moisture resistance. Like HDPE, it’s also cost-effective.

Nylon

Nylon has good mechanical strength and can be filled with glass fibers for enhanced properties. It absorbs moisture, however, so nylon is not a good choice for injection molded products where there’s continuous contact with water.

Succeeding With HDPE Injection Molding

HDPE is an injection molding material with attractive properties, but a manufacturing-ready design and a skilled production partner are critical. Fictiv has the engineering experts and manufacturing network you need to get quality parts fast. From prototyping through production, we’re here to help you succeed.

Create your free Fictiv account and request an injection molding quote today — we mold complex parts at ridiculous speeds!

Because castor oil is a non-drying oil, interesterification and physical blend of castor oil with sacha inchi oil were compared as methods to produce drying oils that could be used for the synthesis of alkyd resins.

First of all, no significant differences were detected between the interesterified product and the physical blend by FTIR, ¹H NMR and other chemical analyses (fatty acids content, viscosity and colour).

However, a remarkably different oxidative behavior between the blend and its interesterified product was observed, i.e., the oxidative induction time of the physical blend was 0.08 h, significantly lower than that of the interesterified product (11.20 h). This indicates that, in addition to fatty acid composition, triacylglycerol composition and fatty acid location at glycerol have a strong effect in the oxidative stability. The ethanol solubility test showed a total dissolution of the interesterification product while the physical blend showed turbidity due to the non-polar nature of the sacha inchi oil.

Quite similar properties

The alkyd resins obtained from the physical blend and the interesterified product presented very similar characteristics of chemical composition, acid value, color, non-volatile matter, and viscosity. FTIR and ¹H NMR analyses did not show significant differences between both resins. The drying times (set-to-touch, dry-to-touch, dry-hard, and dry-to-handle times) were similar regardless of the resin type. However, the cured film obtained from the interesterified product showed a higher hardness (scratch and gouge) than that of the physical blend. This higher scratch/gouge hardness of the cured films derived from the interesterification product can be explained due to the possibly higher degree of crosslinking of the resin, which is consistent with the higher rate of peroxide radical production observed by FTIR.

The other properties of both cured films were quite similar, i.e., water resistance (good), alkali resistance (poor), acidic resistance (good), non-polar solvent resistance (acceptable), adhesion (strong), and drying times.

The study has been published in Progress in Organic Coatings, Volume 162, January 2022.

Nowadays, the electronics industry is developing rapidly, Bluetooth earphones are no longer something new to ordinary people for a long time, but from the perspective of the development of the entire audio industry, Bluetooth earphones are still a new thing, although some high-end brands such as Sony, Qualcomm, Samsung, Apple, etc. continue to innovate, the sound quality of Bluetooth earphones still cannot catch up with traditional earphones, let alone newcomers in the field of Bluetooth–earphone bone conduction earphones. However, the bone conduction sports Bluetooth earphone Runner Pro from Naenka gave me a new understanding of bone conduction earphones.

Before reviewing the Naenka Bone Conduction Sports Bluetooth earphone Runner Pro, let’s briefly talk about what bone conduction is. Simply, bone conduction is to converse the sound into mechanical vibrations of different frequencies, and to transmit the sound waves through the human skull, bone labyrinth, inner ear lymphatic fluid, spiral organs, auditory nerve, and auditory center. Compared with the sound conduction of traditional acoustic headphones, bone conduction does not have to pass through the tympanic membrane, which can protect hearing; at the same time, bone conduction eliminates the step of sound wave transmission, which means that we can can still hear the sound of the earphone clearly in any occasion without affecting the communication with the outside world .

Well, let’s turn back to the Naenka Bone Conduction Sports Bluetooth Earphone Runner Pro. The color of Naenka Runner Pro bone conduction earphones is Legend Black which uses black packaging, on the front is the Naenka English LOGO rendered in golden fonts and the concept of bone conduction headphones ”Non-In-Ear Bone Conduction Technology”; on the back of the box is the rendering of the earphone, core selling points of products and the related information.

On the left side of the box is the Naenka Runner Pro bone conduction earphone, and the accessory box for the manual, charging cable and soundproof earplugs are on the right. From the appearance, the Naenka Runner Pro bone conduction earphone is made of memory aluminum alloy, silicone, and plastic. This is why it can be recovered after being bent; back-hanging earphones will hurt if they are worn for a long time, which is the indelible shortcoming of this design, so it is important to make the earphones lighter. The Naenka Runner Pro bone conduction earphone weighs only 33 grams. The extremely light weight will not cause ear pain even if worn for a long time, and the surface of the earphone is covered with the silica gel, the whole touch is still very soft.

It is worth mentioning that the Naenka Runner Pro bone conduction earphone can be fully adapted to the frames of glasses, and there will be no problems with wearing both earphone and glasses. And even if you jump, there is almost no movement, which is quite friendly for people who wear glasses like me.

In terms of detail design, the external of the left side is the Logo “Naenka”, and the internal is the product information; at the bottom of the right side, from top to bottom, are the on-off button–press to switch on and off–and the volume increase/decrease button, the design of the entire button is not much different from similar products on the market. But the most surprising thing is the inner charging port, which uses a flat magnetic charging technology. Compared to the traditional charging port, it is not easy to bend and damage, not easy to dust, easy to clean, anti-oxidation, and enhanced waterproof effect, and extend the service life, but this also means that we must bring the Naenka Runner Pro bone conduction earphone charging cable in addition to the traditional Type-C charging cable.

Since we are talking about the charging port, let’s take a look at the battery life of the Naenka Runner Pro bone conduction earphone. Its battery capacity is 230mAh, the battery life is six hours, and the standby time is 240 hours, that is, ten days. From the actual use of the situation, after two hours of continuous use, the remaining power is 70%. Judging by  my one hour of exercise time per day, I can basically charge it once a week.

As a sports Bluetooth earphone, waterproof and sweat-proof are essential, after all, sweat is inevitable. Naenka Runner Pro bone conduction earphone adopts seamless injection molding, fully enclosed cavity design and IPX8 waterproof and sweat-proof level to ensure that it can operate stably in various sports venues, even when swimming and bathing.

After all this, it’s time to talk about the most basic quality of headphones–listening to music. The Naenka Runner Pro bone conduction earphone comes with 8GB of internal storage. It means that we can store 1500 songs in the earphone, including WAV, FLAC, APE, MP3, WMA and other music formats. The earphone can be connected to the computer through the data cable to transfer data and store the songs, which is the memory mode of the Naenka Runner Pro bone conduction earphone; of course, you can also connect to the device via Bluetooth for song playback, that is, the Bluetooth mode. In the current market of similar products, most of them only support the Bluetooth mode, and there are not many products that have both two modes at the same time.

For a long time, sound leakage is the inevitable problem of bone conduction headphones. The Naenka Runner Pro bone conduction headphones use a imporous body design and exclusive OT closed 2.0 sound leakage reduction technology to reduce 80% of the sound leakage, basically solve the sound leakage of most bone conduction headphones, so that the sound quality has also been greatly improved, and it can also have a good playback effect even in a noisy environment; with the new generation of vibration absorption technology, the same volume, less vibration, more comfortable to wear.

In terms of sound quality, the Naenka Runner Pro bone conduction earphone is equipped with a 16nm large dynamic unit. In conjunction with the new bone conduction technology, the sound field is more open. From the audition effect, the bass can be strong and powerful, while the mid-range and the treble is delicate and extremely penetrating, and the human voice is natural. Naenka Runner Pro bone conduction headphones are excellent enough in sound control.

Noise cancellation and latency are not the key points of bone conduction headphones, while the performance of Naenka Runner Pro bone conduction headphones are also very good in these two aspects. Bluetooth 5.0 technology can achieve game optimization. It can clearly locate the position of the “enemy” through the sound in the “Game for Peace”, the perception of “enemy”, the perception of footsteps from far to near is very obvious; and with the support of the CVC 6.0 noise cancellation technology, Naenka Runner Pro bone conduction headphones can recognize human voices and noises, and can maintain a clear call in any noisy environment.

The author says

As a middle-aged man, exercise has become part of my daily life. I rarely wear headphones before, because I often wear earphone when writing articles, and exercise time is the rare the time that I don’t need to wear earphone. With the Naenka Runner Pro bone conduction headphones, wearing the headphones for a long time will not hurt the ears, and the overall sound quality is maintained at a high level.

If there are shortcomings, I personally may prefer Type-C, but of course it doesn’t matter if it is just used at home. Well, this is all the simple use method and experience of this bone conduction Bluetooth earphone. If you have any opinion about bone conduction earphones, welcome to chat together.