Preparation before filling inert ceramic ball:

(1) The dust and sundries in the tower should be cleaned up before the ceramic ball is loaded.

(2) In the interior of the tower, mark the loading height line of each ceramic ball and catalyst according to the loading drawing.

(3) Cranes, cranes and other necessary machinery should be prepared for large-scale projects.

(4) The staff who take part in the loading of ceramic balls should have a clear division of labor and be dedicated full-time so as not to cause confusion

(5) Check whether the ceramic ball and catalyst are consistent with the requirements of the loaded porce

In the construction process:

(1) When filling the lowest layer in the tower, we should pay attention to not causing damage to other systems in the tower. After paving the first layer, we should use tools to evenly tile the layer and ensure that the surface of the layer is on the same level.

(2) After the completion of the bottom installation, the platform for easy operation of the construction personnel should be laid first, so as to avoid the horizontal movement of the porcelain ball layer caused by the workers standing directly on the porcelain ball.

(3) The thickness of each layer of porcelain ball should be accurate and uniform, and the height should be consistent with the marked horizontal line.

Points for attention:

(1) In order to facilitate the operation of staff, low-voltage lighting should be connected to the interior of the tower.

(2) Before the operation, the staff should take off the easy to fall off items with them, wear professional work clothes and take good safety measures.

(3) In strict accordance with the porcelain ball loading construction drawings, the construction must be reviewed after completion.

(4) Measure the height of the remaining space, calculate the volume of the remaining space and the amount of ceramic balls required.

(5) After the completion of the installation, the whole construction should be carefully reviewed.

Shanghai International Advanced Ceramics Exhibition is sponsored by China (Shanghai) International Advanced Ceramic Industry Exhibition,Focusing on the mainstream and new trends of advanced ceramic materials and products, advanced technologies, and advanced ceramic upstream and downstream industrial chains.

 

As industrial ceramic manufacturer and developer , Pingxiang Chemshun Ceramics Co.,Ltd attended the 13^th Shanghai Advanced Ceramics Exhibition with booth No.H1.C273 .

 

Different kinds of advanced industrial ceramics products wear shown in this exhibition, such as ZTA zirconia toughened alumina ceramics, ceramic lined pipeline, SIC silicon carbide ceramics, high alumina 99.7% fine ceramics, mineral ceramic balls with zirconia, yttria-stabilized zirconia, silica, alumina material. Which attracted many visitors’ attention and negotiation, like domestic and foreign universities, research institutes, ceramic purchasing companies.Fortunately, 4 orders have been generated when exhibition closed. At the same time, we also promoted much communication with downstream raw material supplies,it is much helpful for Chemshun ceramics promotion and study.

 

Chemshun Ceramics another online exhibition with booth No.574212 is coming from Aug 28^th to Sep 6^th, welcome to concern on our showroom : http://chemshun-04.bossgoo.com.

              

Wear resistant ceramics elbow bend pipe, pipe sleeve is used as composite ceramics pipe lined steel , wildly used in power plant boiler milling system piping. When welding it, you should pay attention to these relevant standards:

1. To prevent defects such as pores and cracks, the rust, scale, oil and debris on the sides of the weld bevel must be removed and kept clean and dry before welding.

2. Titanium calcium type should be dried at 150 ° C for 1 hour, low hydrogen type should be dried at 200-250 ° C for 1 hour.

3. It can’t be heated repeatedly. Repeatedly heated will decompose the carbide, then decrease the corrosion resistance and the mechanical function, and the post-weld hardenability will be increased, then it’ll be easier to occur crack.

4. When use low-hydrogen electrode to weld, it is necessary to perform preheating above 300 °C and slow cooling at 700 °C after welding. If the weldment can’t be post-weld heat treated, you should use a chrome-nickel stainless steel electrode as weldmen instead of  low-hydrogen electrode.

5. The end of the weld should be filled. For multi-pass welding, the previous weld slag should be removed and the inter-layer temperature of the weld should be measured and recorded before the next weld. And the Interlayer temperature should be controlled at 100~250°C.

Pingxiang Chemshun ceramics supply wear resistant ceramic steel composition pipe, bend and sleeves, wear-resistant ceramics pipe lining with high hardness, superior abrasion, light weight and corrosion and chemical resistance.

If you’re interested in our products, welcome to contact with us by email [email protected] or call 0086-15879957696 (whatsapp and Wechat is same).

Kansai Helios and The Nordic Mark formed a strategic distribution partnership to enhance Kansai Helios’s presence in the Czech market, with thenordicmark taking over distribution of brands directly from Beroun warehouse.

Kansai Helios and The Nordic Mark have entered into a strategic distribution partnership to support the growth of Kansai Helios in the Czech market through joint expertise. From March 1, 2024, The Nordic Mark will serve the market directly from the warehouse in Beroun. The existing Kansai Helios Deco team will join The Nordic Mark and continue to support and serve the partners in the Czech Republic.

The Nordic Mark is an experienced and leading distributor of decorative coatings also in Hungary, Romania and Bulgaria. Kansai Helios will continue to focus on its expertise as a system supplier of industrial coatings, powder coatings, automotive coatings and other segments.

Time to read: 1 min

Earlier this month, we had the pleasure of hosting Women in Hardware at our space for an inspiring panel on prototyping best practices.

Women in Hardware is a fantastic organization that aims to connect the female founders, engineers, investors, manufacturers, and marketers who are building the future of connected hardware. Women in Hardware is comprised of over 500 women across SF, NYC, Boston, and beyond.

The panel included Gabrielle Guthrie (Co-Founder of Moxxly), Eva Hoffman (Design Director at D.Light), and Sylvia Wu (Manufacturing Lead at Fictiv), and was moderated by Kate McAndrew (Associate at Bolt and founder of Women in Hardware).

The panelists’ engaging discussion covered topics including how they think about prototyping processes, user testing, and necessary resources for building hardware products.

It was a great evening with over 50 attendees, and we couldn’t have done it without our co-sponsor Bolt and the amazing community efforts of Women in Hardware. Check out the video below or the photos on our Facebook page. 

Want to hear about our next event? Subscribe to our SF events newsletter here!

Time to read: 1 min

We know how important it is to have confidence in the materials you source for critical builds. And whether you need material traceability for code compliance, meeting client requirements, or internal quality management purposes, it all starts with material certifications. 

That’s why Fictiv has made it easy to add material certifications to your orders! You can now request material certifications for all CNC orders, including those made in the USA as well as overseas. (You can find a complete list of available materials here.)

Material certifications verify the source and composition of the materials we provide — so when you pick a specific grade of stock, you can rest assured that what you get will have the mechanical properties you expect. The best part? Instead of requesting certifications through a sales representative, you can select the certifications you need through the Fictiv platform, with all the benefits of instant quoting and more. From there, your certification documents will show up in your order detail page online.

Fictiv – Quality Parts You Can Trust

No matter how complex your designs or how exacting the standards for the materials necessary to bring them to life, Fictiv delivers what you need. So, get an instant quote today and let’s build something great, together.

1.Bending die selection
Bending(China sheet metal processing) molds are divided into standard molds and special bending molds according to the bending process. Under standard bending conditions (right-angle and non-right-angle bending), standard molds are usually used for bending, and special molds are used for bending some special structural parts (such as step bending, pressing dead edges, etc.). In addition, when bending different thickness sheets, the opening dimension “V” of the die under bending is selected differently. Generally, the size of the “V” -shaped slot opening is 6-10 times the thickness of the plate (0.5 ~ 2.6mm is 6t, 3 ~ 8mm is 8t, 9 ~ 10mm is 10t, and 12mm is 12t). When the plate is thin, the orientation is chosen to be a small number, and when the plate is thick, the orientation is chosen to be a large number. For example: when bending a 2mm plate, a 12mmV slot can be used. The standard bending angle is generally not less than 90 degrees, and the sharp angle of the upper and lower dies of the standard bending machine is usually 88 degrees. In the case of non-standard bending, different upper mold shapes can be selected to bend the sheet at different angles and shapes. For special shaped sheet metal parts, special bending molds can be selected for forming and bending.

2. Segmentation of the mold
Generally, the standard length of the bending machine mold is 835mm. In principle, it can only bend large-size work. If the mold is divided into small sections of different lengths, and freely combined through different mold lengths, it can be convenient to bend box-shaped workpieces or boxes of different lengths. In the industry, the segmentation of the bending mold has a standard segmentation size, such as: standard segmentation 835 segments: 100 (left ear), 10, 15, 20, 40, 50, 200, 300, 100 (right ear) = 835mm. Of course, it can also be divided according to user requirements.

3. Calculation of bending force If we want to bend a relatively large and thick plate, we must first understand the required bending tonnage force. Then we can calculate the tonnage required for bending (recommended that the pressure required for bending of the workpiece is within 80% of the rated tonnage of the equipment). Through calculation, we can also determine the tonnage required for bending. The choice also affects the bending force.

CNC sheet metal processing is professional, if you need, please send email to [email protected]

Pillow Block matching meeting  in progress!!!

Welcome to attend!!!

URL:https://app.hopin.com/events/2021-april-china-bearing-and-power-transmission-online-expo/sessions

摘要

本文探討了奢華花崗岩水槽如何成為現代廚房設計的重要元素，以及它對提升生活品質的影響。 歸納要點:

• 奢華花崗岩水槽是廚房設計的新趨勢,能有效提升居家品味與實用性。
• 預算規劃是打造夢想奢華廚房的關鍵,了解不同款式與材質的價格範圍至關重要。
• 正確的保養和維護方法能延長花崗岩水槽的壽命,保持其永恆璀璨的外觀。

選擇合適的花崗岩水槽不僅能增添美感，還能在日常使用中提供卓越性能和耐用性。

選擇您夢幻的奢華花崗岩水槽

選擇您夢幻的奢華花崗岩水槽，絕對是提升廚房品味的最佳方式。嵌入式安裝讓水槽無縫融入櫃檯，這不僅美觀，也避免了汙垢堆積，更容易清潔。想像一下，每次洗菜或餐具時，都能享受平坦整潔的操作空間，多麼愉快！接著，雙水槽設計是忙碌家庭的救星，可以同時清洗和瀝乾，不再需要一個一個來。不要忘了抗菌表面處理，它能有效阻止細菌滋生，為家人提供健康保障。在選擇花崗岩水槽時，這些特性都能讓您的廚房既實用又高雅，是不是很值得投資呢？

打造符合預算的廚房奢華風

在打造符合預算的廚房奢華風時，我們可以從幾個經濟實惠的選擇入手。預製花崗岩水槽是一個不錯的選擇。它們雖然是工廠生產，但卻能提供與定製款相似的美觀與耐用性，安裝也非常簡單，讓各種風格的廚房都能輕鬆搭配。

接著，人造石英水槽則是另一個值得考慮的選項。這些水槽結合了天然石材的外觀和石英材質的強韌性，不僅價格上更親民，而且抗刮擦、耐熱，非常適合忙碌家庭使用。它們還有多樣化的顏色和設計可供選擇，可以滿足不同品味需求。

我要提到的是混合材料水槽，它們將不同材質如花崗岩和不鏽鋼結合在一起，創造出獨特而吸引人的視覺效果。不僅美觀，還兼具耐用性，讓你的廚房既有個性又不失實用。我覺得這些方案真的是提升居家品味，同時又不會讓荷包大出血的方法！

我們在研究許多文章後,彙整重點如下

網路文章觀點與我們總結

• 花崗岩水槽設計超大空間,適合清洗大型物品。
• 寬敞的工作空間可容納烘焙用具、大型鍋具等。
• 耐高溫可達240度,不易破裂或受損。
• 表面堅硬且不易刮傷,避免污漬滲透。
• 提供多種尺寸選擇,符合不同廚房需求。
• 搭配防臭彎管,有效阻止異味及蟑螂侵入。

在家居生活中，廚房水槽是我們日常使用的重要設備之一。一個好的水槽不僅能讓清洗變得輕鬆，也能提升整體廚房的質感和功能性。花崗岩水槽以其耐熱、耐磨的特性，以及超大的空間設計，非常適合喜歡烹飪的人士。不論是大鍋還是烤盤，都能輕鬆應對。此外，多樣化的尺寸與優雅風格，也讓每位家庭主婦都能找到最契合自己需求的選擇。

觀點延伸比較:

特性 花崗岩水槽 不鏽鋼水槽 陶瓷水槽 塑料水槽 人工石水槽 耐熱溫度(℃) 240 500 200 80 180 刮傷抵抗能力 優秀 (表面堅硬) 良好 (可能出現凹痕) 一般 (易受損) 差 (容易劃傷) 良好 (視材料而定) 污漬滲透性 極低 (避免污漬滲透) 中等 (需定期清潔) 高 (容易吸附污垢) 極高 (不耐用更易變色) 中等 (視外層處理而定) 適合大型物品清洗? 1 1 防臭功能配件選擇? 1 1 1

花崗岩水槽的常見疑問

在選擇花崗岩水槽時，常見的疑問主要集中在以下幾個方面：

1️⃣ **永續性**：現今消費者越來越重視環保，花崗岩水槽因其天然材質而備受青睞。開採過程不會對環境造成永久性破壞，而且相比人造材料，其製作過程中的碳排放較低，這讓愛護地球的你我都能安心使用。

2️⃣ **抗菌特性**：你知道嗎？花崗岩本身就具備天然抗菌效果！這意味著，它能有效抑制細菌滋生，給你的廚房帶來更多潔淨與安全感，尤其是在準備食物的時候，更是不可或缺的保障。

3️⃣ **維護與保養**：雖然花崗岩水槽耐用，但日常維護仍很重要。建議使用中性清潔劑來清洗，避免酸性或鹼性的產品，以免損傷表面。另外，每隔一段時間使用石材專用保養蠟，可以保持亮澤度並延長使用壽命。

選擇花崗岩水槽，不僅提升居家品味，也是對環境與健康負責任的選擇！

花崗岩水槽的保養與維護

花崗岩水槽的保養與維護其實並不難，關鍵在於日常的清潔和定期的專業檢查。對於日常清潔，可以用中性清潔劑和柔軟海綿輕輕擦拭，不要使用鋼絲刷或強酸性清洗劑，這樣才能保持水槽表面的光澤。如果有油漬或食物殘渣，可以用小蘇打粉加水製成糊狀物塗抹，再用清水沖洗乾淨。

對於特殊汙漬，比如紅酒或咖啡等難以去除的汙點，可以試著將白醋噴灑在汙漬上，靜置5－10分鐘後再擦拭，通常能有效去除。但如果還是無法處理，就建議尋求專業人士的幫助。

一年進行一次專業保養也非常重要，他們會使用專業裝置檢查潛在問題並進行深層清潔。這樣不僅能延長水槽的壽命，也能讓你的廚房始終保持最佳狀態。

奢華花崗岩水槽：廚房品味的終極提升

在廚房中，奢華花崗岩水槽不僅是一個功能性的設施，更是品味的象徵。這種水槽以其卓越的耐久性著稱，無論是抵抗刮痕、熱損還是化學物質，都能保持完美如新，讓你的廚房永遠散發高雅氣息。想像一下，當你擁有一個色彩斑斕的花崗岩水槽時，它就像一件藝術品，不同於傳統的不鏽鋼選擇，你可以依照自己的風格隨意搭配。

而且，它的設計不僅美觀，其深邃的容積也非常實用，可以輕鬆放下大型鍋具，而斜面邊緣則讓清理變得毫不費力。內建的瀝水架更為你的廚房增添了便利性，使得烹飪過程既簡單又愉快。這樣一來，你是否已經開始想像自己在這樣一個奢華環境中創作出美味佳餚呢？

On June 9, 2023, Luoyang Bearing Research Institute Co., Ltd.(ZYS) celebrated its 65th birthday. Here, we extend sincere condolences to all cadres and employees, as well as to retired leaders and comrades! Sincere thanks to leaders at all levels and people from all walks of life who have long cared about and supported the construction and development of ZYS!

65 years ago, ZYS emerged in the first long-term science and technology plan of New China. Generations of ZYS people have been forging ahead with the spirit of breaking through mountains and building bridges when facing water, exploring and innovating with the spirit of knowing and overcoming difficulties, and persevering with the resilience of being victorious in a hundred battles. They have shed their youth and dedicated their time to the development of China's bearing industry, and have written a glorious history with their hard work and sweat.

Production workshop and technical training in the early stage of establishment

For 65 years, from bearing design and development to finished product manufacturing, from bearing testing to inspection and identification, from issuing core journals to revising bearing industry standards, various types of bearing products and components with an inner diameter of 0.6 millimeters to an outer diameter of 7.1 meters have been developed. ZYS always adheres to the spirit of "striving for excellence and excellence", adheres to the quality policy of "striving for excellence both internally and externally for customers, and striving for stability and reporting to the country", and practices the original intention of "serving the needs of the country as the director of the forging shaft research institute", fully promoting China's transformation from a major bearing manufacturing country to a strong bearing manufacturing country.

Today's ZYS production site

We will not forget our original mission and serve the national strategy. Along the way, in the face of the complex internal and external environment, we have always harbored the "greatness of the country" in our hearts, shoulder the heavy burden, and move forward without hesitation. The launch of the "Long March", the "Shenzhou" journey, the "Chang'e" lunar exploration, the "Tianwen" exploration of fire, and the "Dream of Heaven" realization of dreams… ZYS products have witnessed the development of China's aerospace industry from scratch, from weakness to strength, and together play the colorful music of building a strong aerospace country in the vast universe.

ZYS products provide protection for China's aerospace industry

We focus on technological innovation and lead the development of the industry. On the path of scientific research, the team of Axis Research Institute has overcome difficulties and never retreated. We have targeted the "bottleneck" issue in the field of major technological equipment, condensed the direction of key core technology research, and formed a group of core technologies with independent intellectual property rights. With 947 major scientific and technological achievements, 32 national scientific and technological awards, 761 revised standards, and 975 authorized patents, the inscription of "China Bearing Technology Star" has shone to this day.

Scientific research team overcomes difficulties and gains full honors

We keep pace with the times and reform to empower high-quality development. Since the 19th National Congress of the Communist Party of China, ZYS has taken strategic restructuring as a new starting point, implemented "secondary entrepreneurship", fully implemented the requirements of "two in one", and deepened the promotion of the "Three Year Action for State owned Enterprise Reform" and "Science and Technology Reform Demonstration Action". Focusing on accelerating the construction of a Dual circulation, seizing new opportunities in the digital era, comprehensively integrating internal and external resources, promoting the transformation and upgrading of product structure, improving the ability of scientific and technological innovation, contractual reform of the Term of office system, and activating the endogenous power of high-quality development. Promote development through reform and deepen with the achievements of development.

About ZYS

ZYS focuses on developing high-performance bearing products for key units of national economic construction. We perform batch production of various high-rank bearing products and components with inner diameter of 0.6mm to outer diameter of 6.8m. We are mainly engaged in the research, development, production and sales of precision bearing, special bearing, high-speed machine tool spindle, bearing special equipment, bearing testing instruments, bearing testing machine and bearing special materials, which are widely used in the fields of aerospace, machine tools, wind power generation, mine metallurgy, petrochemical, medical equipment, automobiles and rail transit, construction machinery, intelligent manufacturing services, etc.

Contact ZYS

E-mail:[email protected]

Tel: 0086-379-64884656

Web:www.zys-bearing.com

Address: No.6 Fenghua Road Road, Luoyang City,Henan Province,China